Different Types of Power Shower

Many individuals find that power showers are an excellent way to ensure that they have powerful showers on demand. These types of shower are ideal for use in areas where the local water pressure is naturally very low. Shower pumps overcome any low water pressure issues and also stop the problem of pressure dropping when water is in use elsewhere in the house or property. There are three basic types of power shower in use today, some more popular than others: built in pumps, single impeller pumps and double impeller pumps.

The built in pumps work by combining both the mixer valve and the pump together into one unit which is then fixed to the wall of the shower unit. The hot and cold water is then fed into this unit to be mixed to attain the correct temperature. These pumps basically work by boosting the flow of water.

Single impeller pumps work by feeding the mixer with hot and cold water directly from the tanks. The pump is placed between the mixer and the shower head but needs to be installed near to the shower head. These showers are not very convenient and are also not that much more expensive to obtain than a double impeller pump. As a consequence of this, single impeller pumps are not used very often nowadays.

Double impeller pumps are the most common type of pump in use today. This type of pump is able to serve more than one shower as well as the water supply to other outlets such as sinks or baths, etc. It works by boosting the power of the water coming from the hot and cold tanks.

People need to know that power showers only work by boosting the pressure of the supplied water and not by actually heating this water, which is what electric showers do. This type of shower has to be connected to the water tanks as opposed to directly to the mains. Also, power showers can only be connected by a qualified electrician as they require electrical power from the main electric supply of the property.

The process by which the showers normally work is by drawing the water required from below the water level found in the tank. The reason that this is necessary is so any air being drawn into the water is avoided.

Another point to bear in mind for individuals who have fitted power showers is that due to the high pressure of the water coming from power shower units, it is often advisable to ensure that the installed shower tray in the shower cubicle has a suitable depth, and that the waste connection is sufficient enough to make sure all water flows away properly and correctly. This is to ensure that there is no overflowing of the water once the shower has been started.